2300x890x600 BORG bench, galvanized steel BOBE.2300D.ZnRc

The landscape of our future - BORG Benches

Product description
BORG is a line with solid seating furniture. A bench can be
produced with and without backrest. You can apply it both single and double sided. By combining a one-sided bench with
The BORG table is a solid picnic combination.
In the same series, we also have a picnic set, trash cans and
bicycle racks. You will find them in our product categories.

Generally:
Our benches are always equipped
in:
• Mounting holes for mounting to surfaces
• 5-year warranty (expiring)
Standard material
Frame material
• 8 mm Corten steel
• 8 mm galvanized steel + 2 layers
powder painting
Seat material
• Material: Garapa
Options
• Moso Bamboo Extreme seat
• FURNS Concrete foundation

Specifications:

Important
• All products must be unpacked immediately upon delivery.
• Any type of (hard) wood will turn gray when exposed to UV radiation, weather and wind. The final color depends on
initial color.
• Wood is a natural product that "works" and contracts or expands with temperature and humidity.
• Hardwoods can turn black on contact with Corten steel, which will eventually turn gray.
• Corten steel should never be constantly wet, it should have good drainage and ventilation in all situations.
• Corten steel products are not (completely) rusted on delivery, we only use Corten steel type S355JOWP.
• Coastal areas: We do not recommend using Corten steel within 2 km of the coastline.
• Rust residues may peel off the product during the airing process, which can lead to stains.
• Drilling / grinding into the material is prohibited.

Maintenance
• Regular cleaning (WOCA exterior surface cleaner) and sealing (WOCA exterior oil) of the wood ensures that the pigment in the wood
lasts longer and the discoloration process is delayed.
• Annual cleaning by removing dirt with clean tap water.
Note! Do not use a high pressure washer.

Placement

1. Provide a flat, solid (vibrated) surface. If not done carefully, it can put stress on the product that may damage the product. 2. Place the FURNS concrete feet in the desired location to make a stable base.
3. Place the BORG bench on concrete bases so that the holes in the base plate match the screws from the base. Use a forklift if necessary bench weight. Note! To prevent damage to the product, we recommend mounting using the forks of a forklift 4. Place the bench on the concrete base so that the holes in the base plate match the screws base sleeve. Note! First, loosely tighten all the screws, then can be tightened.
5. Cover the concrete base and base plate with soil and finish the pavement. Note! Make sure the footrest is 150 mm below ground level to maintain seat height 450 mm.